Quality Construction, Materials & Environment
The J/112E hull, deck, main bulkhead and structural grid are built with resin infusion construction. Infusion is a method of introducing catalyzed resin into a pre-layout of dry material under vacuum. Dry fibers are placed in mold, with the core material and this is then covered by a special flow cloth and a flexible vacuum bag, a high pressure vacuum is then applied and a series of resin tubes draw catalyzed resin into the part. The result is a high quality method of production which produces results repeatedly and consistently. This allows dimensional control and regularity of weight and unlike a pre-impregnation process, does not require special materials storage conditions or an oven. An economic and reproducible process, direct positioning of dry fibers is easier and more precise than in traditional hand lay-up processes. It also allows controlled placement of fiber direction, as it is not impeded by gel times. The perfect control of the quantity of resin infused and the dry placement cloth make it possible to obtain extremely homogeneous finished parts. The weight variation of the piece is very small (1 to 2%), a performance which is impossible to achieve with hand lamination.
The J/112E is molded with a vinylester barrier coat applied behind the durable gelcoat finishes. This combination in the outer hull layer allows for the best hull blister protection available. The aircraft grade end-grained balsa core and foam core in the deck are sandwiched between carefully selected and placed inner and outer skins of bi-axial and triaxial e-glass fabrics. This sandwich is infused under vacuum for resulting composite parts that are stiffer and lighter than hand-layup. This construction system improves sailing performance due to better strength to weight ratios in the part and improves sailing comfort by reducing weight and lowering the vertical center of gravity (VCG) of the boat.
Working with dry materials does away with most exposure to resin & styrene, and does not require special protection, masks, gloves, oxygen tanks, etc.. During infusion and curing the styrene remains contained in the bag, thus reducing the emission of VOC (Volatile Organic Compounds) to less than 10 ppm and providing a much "greener" and healthier work environment. In short, the J/112E is one of the "greenest", most environmentally-friendly and socially responsible sailboats you can buy today!